Exposed interior brick can add a nice, decorative touch to your Cincinnati home, but because brick is a porous material and prone to staining, it can be cumbersome to clean.

Standard household detergents alone are rarely enough to clean brick properly, so if your home features exposed interior brick, plan to use alternative cleaning methods instead.

Here is how to do it.

First, find a pair of sturdy rubber gloves to protect your hands from the harsh brick surface and from your cleaning agents. Then, with a dry dish cloth, gently wipe the entire surface of the brick wall to remove loose dirt and dust.

Next, pour a grease-cutting dish detergent into a small bucket. Do not add water to the detergent. Add a small amount of table salt instead.

Mix well.

Next, apply a thin layer of the soap-and-salt mix to the bricks using a cloth and allow the mix to sit on the bricks for 10-15 minutes. Then, with a hard-bristled scrub brush, gently scrub the brick to remove the stubborn dirt.

Lastly, dip a clean dishcloth into a warm water-filled bucket and use the dishcloth to remove the detergent mix from the wall.

Allow the wall to air dry.

Cleaning exposed interior brick is more complicated than cleaning other household surfaces but a clean brick wall can help reduce in-home health hazards and keep your brick in its best possible condition for the long-haul.

It’s October and the fall season has officially started. For homeowners throughout Ohio and nationwide, the change of season is a well-timed, “preventative maintenance” reminder.

As temperatures cool, there are a handful of do-it-yourself projects you should undertake in order to keep your home in tip-top shape through the winter. This 4-minute piece from NBC’s The Today Show highlights just a few of them.

Calling it a “Fall Fix-Up Checklist”, The Today Show’s interview is fast-paced and wide-ranging. Some of the topics covered include :

• Pick up all fallen leaves to limit damage to grass and “critter” invasions
• Unclog gutters to protect windows and foundations
• Turn off outside water sources and remove water from pipes and hoses

The home-tip video also shares how to find air leaks in your home, and how to fix them. Reducing air leaks can lower your home’s heating and cooling bills by thousands of dollars annually.

Although the highlighted projects are DIYs, you may feel more comfortable hiring a professional. Know your “handyman limits”, and remain safe at all times.

With the change of season, it’s a good time to make sure your home’s gutter system is clean and well-functioning.

Home gutters serve a specific purpose. By capturing and funneling rainwater away from a home “footprint” water damage to walls, windows and roofing can be minimized. A well-functioning gutter system can keep a home’s basement from flooding, and a foundation safe from long-term structural damage.

Damaged or dirty gutters can lead to major home damage that may not be covered by insurance.

For homeowners in Indian Hill , keeping clean gutters is essential. Luckily, with the right tools, gutter maintenance can be a do-it-yourself job.

First, gather the necessary tools. You’ll need a ladder for climbing; a bucket for holding debris; a hose for flushing your gutters; and a small, scooping tool such as a trowel.

Next, carefully climb to your gutter. Using your hands, scoop large debris and place it in the bucket. Use the trowel to get to hard-to-reach places and for removing sticks and leaves. For safety, do not stretch to reach the next section of gutter. 

After clearing the first gutter portion, step down from the ladder, move it to the next section of gutter, and repeat. Do this until all gutter sections are free from debris.

Next, find a garden hose with a spray attachment. Carry the hose up the ladder with you to the highest point of your gutter system — usually opposite the downspout. With the water supply on, spray water into the gutter to flush the remaining debris.

If the water fails to drain, there’s likely a clog in the downspout. Using a screwdriver, separate the downspout, find the clog, and remove it. Or, if you find standing water, adjust the slope of your gutter by removing the gutter hangers, fixing the slope, and re-attaching the hangers.

A gutter system should slope roughly one-quarter inch for every 10 feet of gutter. 

Gutter maintenance is a twice a year task that you can do yourself. However, if you’re uncomfortable on a ladder, or prefer to hire professionals, that’s okay, too. As with everything in home maintenance, it’s safety first.

With seasons changing, it’s a good time to look at weatherizing your home. Whether you live in a single-family home, a multi-family property, or a condominium, your home has windows and, through those windows, air escapes.

Even with your windows closed.

In this brief tutorial from Lowe’s, you’ll learn how to use caulk to seal the gaps between your windows and doors and their respective framing to keep your home’s inside air in, and the outside air out.

Weatherizing your windows and doors is a 3-step process:

1. Find the air leaks
2. Clean the surface of existing caulk and debris
3. Seal surface with new caulk, and clean-up

As shown by the video, there are no technical skills required to repair and replace your home’s caulking. It may require a little bit of elbow grease, however. And, depending on your windows’ locations, use of a ladder may be required.

If you’d like professional help weatherizing your home, please ask me for a referral in Cincinnati.