A Cincinnati home’s lighting accounts for 15 percent of its total energy consumption, a fact that’s both costly to homeowners, and “un-green” to the environment. It’s simple to reduce those effects, however — all you need are dimmer switches.

A modern dimmer switch works by rapidly opening and closing a light circuit, providing less energy to the bulb, and consuming less energy from the source.   

In this 2-minute video, you’ll learn how to reduce your home’s standard on/off lighting switches using dimmer switches. The dimmer-switch project is a do-it-yourself project and requires only basic handyman experience. 

First, determine whether you need a 3-way dimmer switch, or a single-pole dimmer switch. If your fixture is controlled my two light switches, you’ll want a 3-way dimmer switch. Otherwise, the single-pole choice is best.

Next, just follow the directions :

1. Cut the power to the light switch via your home’s circuit breaker
2. Remove the existing light switch plate and pull the switch from the wall
3. Disconnect the in-wall wires from the existing light switch plate
4. Connect the in-wall wires to their same-color wires on the dimmer switch plate
5. Push the wires into the wall and reconnect the power via the circuit breaker

The amount of energy that dimmer switches will save your home depends on light-types and to what degree you use the switch’s dimmer capabilities. One caveat, though — not all energy-saving light bulbs are dimmer switch-capatable.

Compact fluorescent light bulbs, for example, don’t work with dimmer switches unless the bulb is specifically designed to be “dimmable”.

The rooms with highest wattage rates are typically the master bathroom and the kitchen. 

When we move into a home, we make changes. Appliances get replaced, rooms get painted, and floors get refinished or recarpeted. It part of how we make a home “ours”.

One item we tend to skip, though, is the changing of the doorbell. In most Cincinnati homes, the existing doorbell is “good enough”. 

Well, if you’ve ever had a mind to change your home’s hard-wired doorbell system, the good news is that changing your doorbell is a simple, do-it-yourself project. Whether you want chimes, songs, or the traditional ding-dong, all you need is a screwdriver, some tape, and the new doorbell system.

This 2-minute video from Lowe’s maps it out :

1. Cut the power to your doorbell from your circuit breaker
2. Unscrew the doorbell face plate
3. Replace the face plate with your new doorbell
4. Locate your in-home receiver and remove the chime system
5. Replace the chime system with your new system

The video also includes helpful tips such as how to use tape to prevent “losing” wires in your walls, and how to label your wires for faster re-wiring.

Changing a doorbell is a quick, 1-hour project. Use the video’s guidance to make you don’t miss a step.

With seasons changing, it’s a good time to look at weatherizing your home. Whether you live in a single-family home, a multi-family property, or a condominium, your home has windows and, through those windows, air escapes.

Even with your windows closed.

In this brief tutorial from Lowe’s, you’ll learn how to use caulk to seal the gaps between your windows and doors and their respective framing to keep your home’s inside air in, and the outside air out.

Weatherizing your windows and doors is a 3-step process:

1. Find the air leaks
2. Clean the surface of existing caulk and debris
3. Seal surface with new caulk, and clean-up

As shown by the video, there are no technical skills required to repair and replace your home’s caulking. It may require a little bit of elbow grease, however. And, depending on your windows’ locations, use of a ladder may be required.

If you’d like professional help weatherizing your home, please ask me for a referral in Cincinnati.